Did you already try Rugby doctor?

Yes

Describe the bug

This is my first time using Rugby on a project, and it only has one extension called OneSignalNotificationServiceExtension, I did run rugby command then after building the project, I got following error:

ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/Alamofire'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/ECSlidingViewController'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/FirebaseAuth'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/FirebaseCore'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/FirebaseCoreDiagnostics'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/FirebaseDatabase'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/FirebaseInstallations'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/GTMSessionFetcher'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/Google-Maps-iOS-Utils'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/GoogleDataTransport'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/GoogleUtilities'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/Kingfisher'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/MBProgressHUD'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/PromisesObjC'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/SDWebImage'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/SwiftyJSON'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/TagListView'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/UICKeyChainStore'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/leveldb-library'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/libPhoneNumber-iOS'
ld: warning: directory not found for option '-F/Path-to-project/Pods/../.rugby/build/Debug-iphonesimulator/nanopb'
ld: framework not found Alamofire
clang: error: linker command failed with exit code 1 (use -v to see invocation)

To Reproduce

Steps to reproduce the behavior:

1. Reinstall pods then run Rugby

pod deintegrate
pod install && rugby

3. Open and build the project
4. See an error framework not found Alamofire

Expected behavior

I expect the project to build successfully.

Environment (please complete the following information):

• Version 1.15.0
• Logs .rugby/build.log (Empty) .rugby/rawBuild.log (No such file or directory) .rugby/rugby.log:

* Rugby version: 1.15.0
* Command: rugby 
* Xcode 12.4 / Build version 12D4e
* Apple Swift version 5.3.2 (swiftlang-1200.0.45 clang-1200.0.32.28)
* CPU: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
* Project: ProjectName
* Git branch: master
---------------------------------
Prepare Read project ✓
Prepare Pods (27):
Prepare * Alamofire
Prepare * ECSlidingViewController
Prepare * Firebase
Prepare * FirebaseAnalytics
Prepare * FirebaseAuth
Prepare * FirebaseCore
Prepare * FirebaseCoreDiagnostics
Prepare * FirebaseDatabase
Prepare * FirebaseInstallations
Prepare * Google-Maps-iOS-Utils
Prepare * GoogleAppMeasurement
Prepare * GoogleDataTransport
Prepare * GoogleMaps
Prepare * GooglePlaces
Prepare * GoogleUtilities
Prepare * GTMSessionFetcher
Prepare * Kingfisher
Prepare * leveldb-library
Prepare * libPhoneNumber-iOS
Prepare * MBProgressHUD
Prepare * nanopb
Prepare * OneSignal
Prepare * PromisesObjC
Prepare * SDWebImage
Prepare * SwiftyJSON
Prepare * TagListView
Prepare * UICKeyChainStore
Prepare Calculate checksums ✓
Prepare Resolving dependencies graph
Prepare Build targets (27):
Prepare * Alamofire
Prepare * ECSlidingViewController
Prepare * Firebase
Prepare * FirebaseAnalytics
Prepare * FirebaseAuth
Prepare * FirebaseCore
Prepare * FirebaseCoreDiagnostics
Prepare * FirebaseDatabase
Prepare * FirebaseInstallations
Prepare * Google-Maps-iOS-Utils
Prepare * GoogleAppMeasurement
Prepare * GoogleDataTransport
Prepare * GoogleMaps
Prepare * GooglePlaces
Prepare * GoogleUtilities
Prepare * GTMSessionFetcher
Prepare * Kingfisher
Prepare * leveldb-library
Prepare * libPhoneNumber-iOS
Prepare * MBProgressHUD
Prepare * nanopb
Prepare * OneSignal
Prepare * PromisesObjC
Prepare * SDWebImage
Prepare * SwiftyJSON
Prepare * TagListView
Prepare * UICKeyChainStore
Prepare Add build target: RugbyPods
Prepare Save project ✓
[20s] Prepare ✓
Build Building sim-x86_64 ✓
Build Update checksums ✓
[5s] Build ✓
Integration Update paths to builded pods ✓
[1s] Integration ✓
Clean up Read project ✓
Clean up Remove sources from project
Clean up Remove frameworks
Clean up Remove products
Clean up Remove build target
Clean up Remove builded pods
Clean up Remove schemes
Clean up Save project ✓
[4s] Clean up ✓
[31s] Cached 27/27 pods.
[!] Project size ↓95%
[!] Indexing files count ↓99%
[!] Targets count ↓93%
[31s] Let's roll 🏈

• Podfile:

platform :ios, '12.0'

source 'https://cdn.cocoapods.org/'

target 'ProjectName' do
  # Comment the next line if you're not using Swift and don't want to use dynamic frameworks
  use_frameworks!
  
  # Pods for ProjectName
  pod 'GooglePlaces'
  pod 'GoogleMaps'
  pod 'Google-Maps-iOS-Utils', '~> 4.1.0'
  pod 'SwiftyJSON'
  pod 'UICKeyChainStore'
  pod 'Firebase/Core'
  pod 'Firebase/Auth'
  pod 'Firebase/Database'
  pod 'SDWebImage', '~> 4.0'
  pod 'Alamofire', '~> 4.7'
  pod 'MBProgressHUD', '~> 1.2.0'
  pod 'ECSlidingViewController', '~> 2.0.3'
  pod 'TagListView', '~> 1.0'
  pod 'OneSignal', '>= 3.0.0', '< 4.0'
  pod 'Kingfisher', '~> 7.0'
  pod 'libPhoneNumber-iOS', '~> 0.8'
  
  target 'OneSignalNotificationServiceExtension' do
    pod 'OneSignal', '>= 3.0.0', '< 4.0'
  end
  
end

Did you already try Rugby doctor? Yes

Describe the bug I have 2 different projects(lets call them Project A & B) and they share some pods. I integrated rugby to first project A successfully without any issue. However, after integrating rugby with my 2nd project B I am getting this error when I try to build project B:

ld: library not found for -lAppAuth
clang: error: linker command failed with exit code 1 (use -v to see invocation)

I dont know what framework is this, doesnt look like any from my pod file.

To Reproduce Steps to reproduce the behavior: Not sure because rugby is working fine with one of my other project.

Expected behavior rugby should integrate without any error to my 2nd project as well.

Environment (please complete the following information):

• Version 1.13.0
• Logs (use rugby doctor)
• Podfile or Example project (if you can share these) rawBuild-log.txt rugby-log.txt cache-yml.txt

Did you already try Rugby doctor?

Yes

Describe the bug

I'm testing rugby integration in my project and seems that for some pods the PODS_ROOT environment value is null. The failure is in the xcodebuild command.

If I replace the ${PODS_ROOT} value with the absolute one (with my user and the project path) its working for these group of pods. The other pods that I have in my project don't have the issue. In total there are around ~35 pods.

To Reproduce

Just a project with the following pods:

• Appsflyer
• Apptimize
• iProov

Expected behavior

I would expect to use the PODS_ROOT in these pods as well

Screenshots

Output of rugby command with the PODS_ROOT:

Output of rugby command hardcoding the path:

This is how I had the Build Phases -> [CP] Copy XCFrameworks for Appsflyer target

Also noted that after running rugby successfully these pods are not being included in the Pods-{project} target

Environment (please complete the following information):

• rugby 1.17.0
• cocoapods 1.10.0
• Xcode 13.2

Unfortunately I can't share logs for the project

Thanks in advance

Describe the bug

• If i use rugby without flutter integration it will not have other pod dependencies showing in pods target.
• But if use with flutter it will add all the pods that flutter needs to the pods target and it is failing. Below attached ss.

To Reproduce

Steps to reproduce the behavior:

• Create a flutter project.
• Integrate the flutter using this link https://docs.flutter.dev/development/add-to-app/ios/project-setup and use Option A.
• Then do pod install through rugby you will succeed and it will create Frameworks folder inside our codebase.
• But because the flutter is doing some random thing its adding other pod dependencies inside pod target and then its failing.

Expected behavior

A clear and concise description of what you expected to happen.

Screenshots

Environment (please complete the following information):

• Xcode 13.2.1

Rugby clean report.

    Clean Removed .rugby/build
    Clean Removed .rugby/cache.yml
    [1s] Clean ✓

• Example podfile

    use_frameworks!
    
    platform :ios, '11.0'
    
    def shared_ui_pod
      pod 'RxSwift'
      pod 'RxCocoa'
      pod 'AlamofireImage'
      pod 'lottie-ios'
    end
    
     submodule linkage
    flutter_application_path = './Flutter/'
    load File.join(flutter_application_path, '.ios', 'Flutter', 'podhelper.rb')
    
    target 'Project' do
    
      # this is only needed for targets using flutter
      install_all_flutter_pods(flutter_application_path)
    
      use_frameworks!
      shared_ui_pod
      app_dependencies

Did you already try Rugby doctor?

Yes, and without any error message.

Describe the bug

I executed rugby cache --arch arm64 --sdk ios after executing pod install, and an error occurred.

> rugby cache --arch arm64 --sdk ios
Prepare Read project ✓
⛔️ Error: The operation couldn’t be completed. (Rugby.Lockfile.LockFileError error 0.)
🚑 Call doctor for more help: rugby doctor

I don't know why I'm getting this error all of a sudden, because I used to use rugby smoothly. I've tried rugby clean or manually deleting files other than plan.yml, and even reinstalling rugby, nothing worked to me.

To Reproduce

Steps to reproduce the behavior:

1. pod install
2. rugby cache --arch arm64 --sdk ios
3. See an error

Expected behavior

no error.

Screenshots

Environment (please complete the following information):

• Version [e.g. 1.15.0]
• Logs (use rugby doctor)

🚑 If you have any problems, please try these solutions.
After each one, you need to repeat your usual workflow.

1. Update 🏈 Rugby to the last version:
   mint install swiftyfinch/rugby
2. Add ignore option rugby --ignore-checksums.
   Be careful, you can't pass this option to plans command this way;
3. Try rugby clean before repeating your usual workflow;
4. Try to clean up your DerivedData and use rugby clean together;
5. Check that Pods project builds successfully without Rugby.

By the way, you can try to investigate build logs by yourself:
.rugby/rugby.log
.rugby/build.log
.rugby/rawBuild.log
and more there .rugby/history

Report an issue in GitHub discussions or any convenience support channel.
Attach last files from .rugby/history folder.
But be sure that there are no sensitive data.

• Podfile or Example project (if you can share these)

sorry, i can not share the podfile，but i can run project success after pod intsall

Additional context

Add any other context about the problem here.

Describe the bug

Rugby cache failing on

I have been looking for the mentioned filename in the whole project but I do not see where it is defined. It does not help also when I exclude Appboy from being cached.

I would welcome any hints that could tell me more what is happening.

To Reproduce

Steps to reproduce the behavior:

1. Just run rugby cache -arch arm64
2. Error occures.

Expected behavior

Framework is built.

Environment (please complete the following information):

• Version 1.20.0
• Logs (use rugby doctor)
• Podfile or Example project (if you can share these)

Additional context

Add any other context about the problem here.

build.log rawBuild.log rugby.log

% brew install mint
==> Downloading https://ghcr.io/v2/homebrew/core/mint/manifests/0.17.1
######################################################################## 100.0%
==> Downloading https://ghcr.io/v2/homebrew/core/mint/blobs/sha256:5faf98e60b6d18332bcac4ab076f6ba861ee7daea4c23a85f97e6c8fa3d1f463
==> Downloading from https://pkg-containers.githubusercontent.com/ghcr1/blobs/sha256:5faf98e60b6d18332bcac4ab076f6ba861ee7daea4c23a85f9
######################################################################## 100.0%
==> Pouring mint--0.17.1.monterey.bottle.tar.gz
🍺  /usr/local/Cellar/mint/0.17.1: 6 files, 1.5MB
==> Running `brew cleanup mint`...
Disable this behaviour by setting HOMEBREW_NO_INSTALL_CLEANUP.
Hide these hints with HOMEBREW_NO_ENV_HINTS (see `man brew`).

% mint install swiftyfinch/rugby
🌱 Finding latest version of rugby
🌱 Cloning rugby 1.17.1
🌱 Resolving package
error: Dependencies could not be resolved because no versions of 'xcbeautify' match the requirement 0.10.1..<1.0.0 and root depends on 'xcbeautify' 0.10.1..<1.0.0.
🌱 Encountered error during "swift package resolve". Use --verbose to see full output
🌱  Failed to resolve rugby 1.17.1 with SPM

% mint install --verbose swiftyfinch/rugby
🌱 Finding latest version of rugby
🌱 Cloning rugby 1.17.1
Cloning into 'github.com_swiftyfinch_rugby'...
remote: Enumerating objects: 263, done.
remote: Counting objects: 100% (263/263), done.
remote: Compressing objects: 100% (225/225), done.
remote: Total 263 (delta 32), reused 151 (delta 17), pack-reused 0
Receiving objects: 100% (263/263), 100.54 KiB | 1.52 MiB/s, done.
Resolving deltas: 100% (32/32), done.
Note: switching to 'f957969911b8a62d67f7b8a3247bab1bd0be32ca'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

🌱 Resolving package
Fetching https://github.com/jpsim/Yams.git from cache
Fetching https://github.com/MaxDesiatov/XMLCoder.git from cache
Fetching https://github.com/apple/swift-argument-parser from cache
Fetched https://github.com/apple/swift-argument-parser (0.63s)
Fetched https://github.com/jpsim/Yams.git (0.63s)
Fetched https://github.com/MaxDesiatov/XMLCoder.git (0.63s)
Fetching https://github.com/JohnSundell/Files from cache
Fetching https://github.com/kylef/PathKit.git from cache
Fetching https://github.com/getGuaka/Colorizer.git from cache
Fetched https://github.com/getGuaka/Colorizer.git (0.52s)
Fetched https://github.com/JohnSundell/Files (0.52s)
Fetched https://github.com/kylef/PathKit.git (0.52s)
Fetching https://github.com/tadija/AEXML.git from cache
Fetching https://github.com/kylef/Spectre.git from cache
Fetching https://github.com/onevcat/Rainbow from cache
Fetched https://github.com/kylef/Spectre.git (0.71s)
Fetching https://github.com/kareman/SwiftShell from cache
Fetched https://github.com/tadija/AEXML.git (0.71s)
Fetched https://github.com/onevcat/Rainbow (0.71s)
Fetching https://github.com/thii/xcbeautify.git from cache
Fetching https://github.com/tuist/xcodeproj from cache
Fetched https://github.com/tuist/xcodeproj (2.04s)
Fetched https://github.com/kareman/SwiftShell (2.04s)
Fetched https://github.com/thii/xcbeautify.git (2.04s)
Computing version for https://github.com/thii/xcbeautify.git
error: Dependencies could not be resolved because no versions of 'xcbeautify' match the requirement 0.10.1..<1.0.0 and root depends on 'xcbeautify' 0.10.1..<1.0.0.
🌱 Encountered error during "swift package resolve"
🌱  Failed to resolve rugby 1.17.1 with SPM

% mint install --verbose tuist/xcbeautify
🌱 Finding latest version of xcbeautify
🌱 Cloning xcbeautify 0.12.0
Cloning into 'github.com_tuist_xcbeautify'...
remote: Enumerating objects: 60, done.
remote: Counting objects: 100% (60/60), done.
remote: Compressing objects: 100% (54/54), done.
remote: Total 60 (delta 0), reused 25 (delta 0), pack-reused 0
Receiving objects: 100% (60/60), 36.00 KiB | 1.20 MiB/s, done.
Note: switching to '66c5e32dacca5f07c26c0c6cbe01c6796fcc6149'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

🌱 Resolving package
Fetching https://github.com/apple/swift-argument-parser.git from cache
Fetching https://github.com/MaxDesiatov/XMLCoder.git from cache
Fetching https://github.com/getGuaka/Colorizer.git from cache
Fetched https://github.com/getGuaka/Colorizer.git (0.61s)
Fetched https://github.com/MaxDesiatov/XMLCoder.git (0.61s)
Fetched https://github.com/apple/swift-argument-parser.git (0.61s)
Computing version for https://github.com/MaxDesiatov/XMLCoder.git
error: Dependencies could not be resolved because no versions of 'xmlcoder' match the requirement 0.13.1..<1.0.0 and root depends on 'xmlcoder' 0.13.1..<1.0.0.
🌱 Encountered error during "swift package resolve"
🌱  Failed to resolve xcbeautify 0.12.0 with SPM

% mint install --verbose CoreOffice/XMLCoder
🌱 Finding latest version of XMLCoder
🌱 Cloning XMLCoder 0.13.1
Cloning into 'github.com_CoreOffice_XMLCoder'...
remote: Enumerating objects: 190, done.
remote: Counting objects: 100% (190/190), done.
remote: Compressing objects: 100% (172/172), done.
remote: Total 190 (delta 44), reused 61 (delta 15), pack-reused 0
Receiving objects: 100% (190/190), 159.19 KiB | 1.89 MiB/s, done.
Resolving deltas: 100% (44/44), done.
Note: switching to 'f30119af03996939cc4f54e0bf0dda9f88a84da5'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:

  git switch -c <new-branch-name>

Or undo this operation with:

  git switch -

Turn off this advice by setting config variable advice.detachedHead to false

🌱 Resolving package
🌱  Executable product not found in XMLCoder 0.13.1

% 

Is your feature request related to a problem? Please describe.

I am using fastlane on CI and after running rugby get error

⛔️ Error: Files encountered an error at '/Users/apple/client-ios/fastlane/Pods/Pods.xcodeproj/'.
Reason: missing

Describe the solution you'd like

add path argument to rugby cache eg rugby cache --path 'path/to/pods/project/Pods.xcodeproj'

Maybe I not found it in docs. Thanks

Did you already try Rugby doctor?

Yes tried it is not helpful. Or I am new to rugby. But it seems like it fails when there are multiple target in the projects and we are using chained dependencies.But I am not sure

Describe the bug

Try to run the attached project. There is one library in the project Mo-Engage. Which causing this issue

To Reproduce

Steps to reproduce the behavior:

1. pod install
2. rugby

Expected behavior

It should run the rugby command

Screenshots

If applicable, add screenshots to help explain your problem.

Environment (please complete the following information):

• Version [e.g. 1.13.0]
• Logs (use rugby doctor)
• Podfile or Example project (if you can share these)

Additional context

Add any other context about the problem here. TestRugby.zip

cat .rugby/build.log

[pop] Touching pop.framework
[nanopb] Touching nanopb.framework
❌ duplicate symbol '_NDR_record' in
❌ ld: 1 duplicate symbol for architecture x86_64
❌ clang: error: linker command failed with exit code 1 (use -v to see invocation)

from Podfile.lock

• Koloda (5.0.1):
  • pop (~> 1.0)
• FirebaseCrashlytics (7.3.0):
  • FirebaseCore (~> 7.0)
  • FirebaseInstallations (~> 7.0)
  • GoogleDataTransport (~> 8.0)
  • nanopb (~> 2.30906.0)
  • PromisesObjC (~> 1.2)

Is your feature request related to a problem? Please describe.

At present time, 🏈 Rugby can't build different combinations of sdk, arch, and config. But there are few requests for this feature.

Describe the solution you'd like

todo: Need to think about:

• [ ] How to change command interface?
• [x] How to change the path to building folders (Debug-iphonesimulator-ARCH)?
• [x] How to build each combination?
• [x] How to save and reuse them in cache.yml

Describe alternatives you've considered

Now, 🏈 Rugby can build combinations by separate calls. All cache folders should be kept.

Additional context

Discussions: #88 Twitter: Does that actually support multiple archs?

Is your feature request related to a problem? Please describe.

I would like to have the ability to force exclude a specific dependency even though it is included in the plan by

- build
  - command: cache
    include: [Alamofire, SnapKit]

Describe the solution you'd like

§ rugby --plan build --exclude Alamofire SnapKit
§ rugby --plan build -e Alamofire SnapKit